Book Chapters (2):

  1. Khoda, Chapter 2: Computer-Aided Design of Additive Manufacturing Components (Invited Book Chapter); Laser-Based Additive Manufacturing of Metal Parts: Modeling, Optimization, and Control of Mechanical Properties; Eds. Bian, L., N. Shamsaei, and J. Usher, Taylor & Francis 2017, ISSN# 1351647482.
  1. Khoda, T.Benny, P. Rao, M. Sealy, and C. Zhou, Chapter 14: Applications of Laser-based Additive Manufacturing, in Laser-based Additive Manufacturing Processes (Invited Book Chapter); Laser-Based Additive Manufacturing of Metal Parts: Modeling, Optimization, and Control of Mechanical Properties; Eds. Bian, L., N. Shamsaei, and J. Usher, Taylor & Francis 2017, ISSN# 1351647482.

Peer-Reviewed Journal Articles (28):

* A Habib, N Ahasan, Adeeb Alam, AN Shovon, and Ruinan Xie are Graduate Students

  1. Khalil, Dezhong Tong, Guanjin Wang, Mohammad Jawed and B. Khoda,. “Systematic Variation of Friction of Rods”, Journal of Applied Mechanics (in-press).
  2. Shovon, A. Alam, W. Gramlich and B. Khoda,. “Micro-particle entrainment from density mismatched liquid carrier system.” Scientific Report, 2022, 12, p. 9806.
  3. Habib, M. and Khoda, “Rheological Analysis of Bio-ink for 3D Bio-printing Processes.” Journal of Manufacturing Processes, 2022, 76 p. 708-718
  4. Alam, M. Rais-Rohani, K. Berube and B. Khoda,. “Mechanical Performance of 3d Printed Lattice Structure: Assembled vs Direct Print.” 3D Printing and Additive Manufacturing, 2022, 0(0) p. 1-13
  5. Khalil and B. Khoda,. “Sorting of Poly-disperse Particle by Entrapment using Liquid Carrier System”. Journal of Manufacturing Science and Engineering, 2022, 144(5) p. 054502
  6. Khoda, AMMN. Ahsan, and A.N. Shovon, “Dip coating from density mismatching mixture”. Journal of Micro- and Nano-Manufacturing, 2021, 9(2) p. 021003. doi:10.1115/1.4051260
  7. Khoda, and AMM. Ahsan, “A novel rapid manufacturing process of metal lattice structure from continuous thin rod.” 3D Printing and Additive Manufacturing, 2021, 8(2), p. 111-125. doi:10.1089/3dp.2020.0184. Top 100 materials science Scientific Reportspapers in 2021
  8. Khoda, A.M.M.N. Ahsan, A.N. Shovon, and A.I. Alam, “3D metal lattice structure manufacturing with continuous rods.” Scientific Reports, 2021, 11(1): p. 434. doi:10.1038/s41598-020-79826-6.
  9. Meaders, C.L., M.K. Smith, T. Boester, A. Bracy, B.A. Couch, A.G. Drake, S. Farooq, B. Khoda,, What Questions Are on the Minds of STEM Undergraduate Students and How Can They Be Addressed? Frontiers’ in Education, 2021. 6(28). doi: 10.3389/feduc.2021.639338
  10. Habib, M. and B. Khoda, Fiber Filled Hybrid Hydrogel for Bio-Manufacturing. Journal of Manufacturing Science and Engineering, 2020: p. 1-38.DOI: 10.1115/1.4049479
  11. Nazmul Ahsan, A.M.M. and B. Khoda, Characterizing Novel Honeycomb Infill Pattern for Additive Manufacturing. Journal of Manufacturing Science and Engineering, 2020. 143(2).DOI: 10.1115/1.4048044.
  12. Habib, M. A., & Khoda, B. (2019). Development of clay based novel bio-ink for 3D bio-printing process. Journal of manufacturing process, 2019, 38 pp.76-87;
  13. Habib, M. A., Sanku Mallik., Venkatachalem, Sathish & Khoda, Bashir“3D Printability of Alginate-Carboxymethyl Cellulose Hydrogel” Materials, 2018, 11(3) pp.454; doi:3390/ma11030454.
  14. AMM Ahsan, Ruinan Xie, Bashir Khoda,(2018) “Heterogeneous topology design and voxel-based bio-printing”, Rapid Prototyping Journal, Vol. 24 Issue: 7, pp.1142-1154,
  15. A Habib, and Bashir Khoda“Support Grain Architecture Design for Additive Manufacturing”,  Journal of Manufacturing Processes, 2017, 29 pp. 332-342;
  16. A Habib, and Bashir Khoda“Attribute driven process architecture for additive manufacturing”,  Journal of Robotics and Computer Integrated Manufacturing, 2017, 44 pp. 253-265;
  17. N Ahasan, and Bashir Khoda“AM optimization framework for part and process attributes through geometric analysis”, Journal of Additive Manufacturing, 2016, 11 pp. 85-96,
  18. N Ahsan, A Habib and Khoda, AKMB “Build Direction for 3d Heterogeneous Object in Additive Manufacturing,” Computer-Aided Design 2015, 69, 112-125.
  19. AKM Khoda“Process Plan for Multi-Material Heterogeneous Object in Additive Manufacturing”, Journal of 3D Printing and Additive Manufacturing (3DP) 2014, 1(4) pp. 210-218,
  20. Ozbolat I.T and Khoda, AKMB “Design of a new Parametric Path Plan for Hollow Tissue Scaffolds with Functionally Graded Materials,” ASME Journal of Computing and Information Science in Engineering 2014, 14(4), 041005 (doi:10.1115/1.4028418).
  21. AKM Khoda. and B. Koc, “Functionally Heterogeneous Porous Scaffold Design for Tissue Engineering”, Journal of Computer Aided Design (CAD) 2013, 45(11): p. 1276–1293
  22. AKM Khoda, T. Ozbolat and B. Koc, “Designing Heterogeneous Porous Tissue Scaffolds for Additive Manufacturing Processes”, Journal of Computer Aided Design (CAD) 2013, 45(12): p. 1507–1523
  23. AKM Khoda, and Bahattin Koc, “Designing Controllable Porosity for Multi-Functional Deformable Tissue Scaffolds” ASME Transactions, Journal of Medical Device 2012, 6(3): 031003-1-12. DOI: 10.1115/1.4007009.
  24. Ozbolat I.T, Khoda, AKMB, M, M., Gardella, J., and Koc, B, “Hybrid Tissue Scaffolds for Controlled Release Applications,” Journal of Virtual and Physical Prototyping, 2012, 7(1): p. 37-47.
  25. AKM Khoda, T. Ozbolat and B. Koc, “Modeling of Variational Gradient Porous Architecture with Multi-directional Filament Deposition in 3D Scaffolds.” Journal of Computer Aided Design and Applications 2013. 10(3): p. 445-459. doi:10.3722/cadaps.2013.445-459.
  26. AKM Khoda,T. Ozbolat and B. Koc, “A New Functionally Gradient Variational Porosity Architecture for Hollowed Scaffold Design.” Journal of Biofabrication 2011. 3(3): p. 1-15. doi: 10.1088/1758-5082/3/3/034106
  27. AKM Khoda,T. Ozbolat and B. Koc, “Engineered Tissue Scaffolds with Variational Porous Architecture”. ASME Transactions, Journal of Biomechanical Engineering, 2011, 133(1): pp.011001-12. doi:10.1115/1.4002933
  28. N.R. Dhar, AKM Khoda, P. Bala, and M.F. Karim “A Study of Effects of Acid Activated Saw Dust on the Removal of Different Dissolved Tannery Dyes (Acid Dye) from Aqueous Solutions” Journal of Environmental Science & Engineering 2005, 47(2): pp. 103-108.

Peer-Reviewed Conference Papers in Proceedings (44):

  1. A.N. Shovon, MI. Khalil, A. Alam and B. Khoda, “Effect of Withdrawal Velocity on Particle Entrainment from Density Mismatched Mixture” Procedia Manufacturing MSEC, ASME, 2022.
  2. MI. Khalil, and B. Khoda, “Size-Based Filtration of Poly-Disperse Micro-Particle by Dipping” Procedia Manufacturing MSEC, ASME, 2022.
  3. Maxwell B., Scott Tomlinson and Khoda, “Thermoplastics 3D Printing Using Fused Deposition Modeling on Fabrics” IMECE, ASME, 2021.
  4. Habib, and B. Khoda, “A Rheological Study of Bio-Ink: Shear Stress and Cell Viability” Procedia Manufacturing MSEC, ASME, 2021.
  5. Khoda, A.M.M.N. Ahsan, and A.N. Shovon, “Solid Transfer of Large Particles by Dipping in a Heterogeneous Mixture” Procedia Manufacturing MSEC, ASME, 2021.
  6. Habib, Md Ahasan. and B. Khoda, “Fiber filled hybrid hydrogel for bio-manufacturing” Procedia Manufacturing MSEC, ASME, 2020.
  7. Ahsan, MA. Habib, A. Shovon, A. Alam, and B. Khoda, “Design and manufacturing of lattice structure using extrusion-based additive manufacturing” Procedia Manufacturing MSEC, ASME, 2020.
  8. Ahsan, MA. Habib, and B. Khoda, “Designing Short-fiber Filled Hybrid Hydrogel for BioManufacturing” IISE Annual Conference, IIE, 2020.
  9. Habib, A. and Khoda, “Comparative Study on Long and Short Cellulose Fiber Filled Bio-ink”. IISE Annual Conference, 2019.
  10. A Dey, N Yodo, B Khoda. “Optimizing Process Parameters under Uncertainty in Fused Deposition Modeling”, IISE Annual Conference, 2019.
  11. Ahsan, A.M.M.N. and Khoda, “Feature Based Honeycomb Infill for 3D Printing”, IISE Annual Conference, 2019.
  12. Habib, and B. Khoda, “Effect of process parameters on cellulose fiber alignment in bio-printing” Procedia Manufacturing MSEC, ASME, 2019.
  13. Ahsan, T. Ihrke, and B. Khoda, “Novel honeycomb infill fabrication pattern for additive manufacturing” Procedia Manufacturing, MSEC, ASME, 2019.
  14. Ahsan, and B. Khoda, (2018). “Adaptive shape conforming honeycomb lattice infill for 3D printing of thin wall objects” SFF 2018.
  15. Habib, & B. Khoda, “Development of clay based novel hybrid bio-ink for 3D bio-printing process”. Procedia Manufacturing, NAMRC, 2018.
  16. Xie, C. Ulven, & B. Khoda,. “Design and Manufacturing of Variable Stiffness Mattress”. Procedia Manufacturing, NAMRC 2018.
  17. Ahsan, A. N., & Khoda, “Honeycomb pattern on thin wall object with grain based 3D printing”. Procedia Manufacturing NAMRC 2018.
  18. Habib, M. A., & Khoda, “Assessing the printability of alginate-CMC hydrogels”. IISE Annual Conference, 2018, (Best paper award, Manufacturing and Design Division, IISE 2018).
  19. Ahsan, R. Xie, & B. Khoda, “Direct Bio-printing with Heterogeneous Topology Design”. Procedia Manufacturing, NAMRC 2017.
  20. Ahsan & B. Khoda, “Grain-based Support Structure Design for Additive manufacturing”. Procedia Manufacturing, NAMRC 2017.
  21. Habib, A. Ahsan & B. Khoda, “Hierarchical Scanning Data Structure for Additive Manufacturing” Procedia Manufacturing, NAMRC 2017.
  22. Ahsan, MA. Habib, & B. Khoda, “Process Plan Optimization for Minimum Build Time” IISE Annual Conference, 2016.
  23. Ahsan & B. Khoda, “Concurrent Process Plan Optimization for Additive Manufacturing Using Genetic Algorithm” ISERC 2016.
  24. Ahsan, MA. Habib, & B. Khoda, “Geometric Analysis for Concurrent Process Optimization of AM”. Procedia Manufacturing, NAMRC 2016.
  25. Ahsan, MA. Habib, & B. Khoda, “Optimizing Material Deposition Direction for Functional Internal Architecture in Additive Manufacturing Processes”. Procedia Manufacturing, NAMRC 2015.
  26. Ahsan, MA. Habib, & B. Khoda, “Resource based build direction in additive manufacturing processes” SFF 2014.
  27. Khoda, “Build Direction with Improved Process Plan for 3D Heterogeneous Object” ISERC 2014.
  28. Khoda, “Build Strategies for 3D Heterogeneous Object in Additive Manufacturing” ICMP 2014.
  29. Khoda, “Build Direction for Improved Process Plan in Multi-material Additive Manufacturing”. IDTEC 2014.
  30. AKM Khoda, İT Özbolat, B Koc, “Functionally Gradient Tissue Scaffold Design and Deposition Path Planning for Bio-additive Processes” ISERC
  31. Khoda, “Build Direction for 3D Heterogeneous Object in Layer Manufacturing” IMECE 2013.
  32. AKM Khoda, İT Özbolat, B Koc, “Spatially multi-functional porous tissue scaffold” Procedia Engineering,
  33. AKM Khoda, B Koc, “Functionally Heterogeneous Porous Scaffold Design for Tissue Engineering” IMECE 2012.
  34. AKM Khoda, İT Özbolat, B Koc, “Modeling of Porous Architecture with Anisotropic Pores and its Multi-directional Filament Deposition Path-plan” IMECE 2012.
  35. T Ozbolat, AKMB,Khoda, J. Gardella, and B. Koc, “Bio-Additive manufacturing of hybrid tissue scaffolds for controlled release kinetics” IMECE 2012.
  36. AKM Khoda, B Koc, “Designing Bio-mimetic Variational Porosity in Tissue Scaffolds” ISERC 2012.
  37. AKM Khoda, B Koc, “Modeling of Multifunctional Deformable Porous Scaffolds for Soft Tissue Engineering” ISERC 2012.
  38. AKM Khoda, B Koc, “Multi-Functional Variational Porosity in Bone Tissue Scaffolds” PROMED 2012.
  39. T Ozbolat, AKMB,Khoda, and B. Koc, “Conformal Tissue Scaffold with Multi-Functional Porosity for Wound Healing” PROMED 2012.
  40. AKM Khoda, B Koc, “Deformation Modeling of Soft Tissue Scaffolds for Wound Healing” IMECE 2011.
  41. AKM Khoda, İT Özbolat, B Koc, “Modeling and Fabrication of Hollowed Scaffolds with Interconnected Variational Porosity Architecture” IMECE 2011.
  42. AKM Khoda, B Koc, “Modeling Continuous Path Planning for Functionally Gradient Hollowed Tissue Scaffolds” IERC 2011.
  43. AKM Khoda, B Koc, “Spatially Varying Porosity with Continuous Path Plan for Hollowed Tissue Scaffolds” VARP 2011.
  44. T Ozbolat, AKMB,Khoda, and B. Koc, “Heterogeneous Tissue Scaffolds for Spatiotemporally Controlled Release Kinetics” VARP 2011,.
  45. AKM Khoda, İT Özbolat, B Koc, “Toolpath Optimization in Solid Freeform Modeling and Fabrication for Tissue Engineering” IERC 2010.
  46. AKM Khoda, İT Özbolat, B Koc, “Geometric Modeling of Complex Tissue Engineering Scaffolds with Controlled Porosity Distribution”, IERC 2009.

Peer-Reviewed Conference Abstracts:

  1. Comparative Study on Long and Short Cellulose Fiber Filled Bio-ink. ISERC-IISE 2019.
  2. Partial Contact Based Support Architecture Design for Additive Manufacturing; SFF 2018
  3. Adaptive Shape Conforming Honeycomb Lattice Infill for 3D Printing of Thin Wall Objects; SFF 2018
  4. STL Free Additive Manufacturing; ISERC 2017, Pittsburgh, PA.
  5. Grain-based Support Structure Design and Generation in Additive Manufacturing, ISERC 2017, Pittsburgh, PA.
  6. Designing and Manufacturing Heterogeneous Porous Internal Architecture of Bio-models, ISERC 2017, Pittsburgh, PA.
  7. Additively Manufactured Cellular Structure Design and evaluation for Anti-Deformation Mechanism, ISERC 2017, Pittsburgh, PA.
  8. Designing and 3D Printing Customizable Shoe (Poster), ND EPSCoR 2016 conference
  9. 3D Printed Tablet: A Newer Approach to Patient-specific Medicine Delivery (Poster), ND EPSCoR 2016 conference
  10. 3D Printed (Mesoscale) Cellular Structure; ND EPSCoR 2015 State Conference
  11. Deposition Direction in Additively Manufactured Part with Features; ISERC 2015 , Knoxville, TN.
  12. “Spatial Comfort Design for Additively Manufactured Shoe”, ISERC 2015 Knoxville, TN.
  13. “Modeling and Fabrication of Functionally Gradient Variational Pore in Hollowed Scaffolds with Continuous Path Plan”, TERMIS-EU 2011 Granada, Spain.
  14. “Computational Modeling of Effective Porosity for a Multi-Functional Porous Tissue Scaffolds/Membrane”, International Conference on Biofabrication, (BF 2010). Philadelphia, PA.

Invited Seminars/Presentations

  1. Manufacturing and Design Division, Industrial and Systems Engineers (M&D-IISE) Invited Webinar ‘Printability of hybrid hydrogels: an assessment for bio-ink’ Feb, 2019
  2. Invited Talk “Digital Manufacturing: Pixelization to Voxelization” Mechanical Engineering Department, University of Maine, June 2018.
  3. Early Career Invited Talk “Performance Driven Cellular Architecture with Manufacturable Topology” Southwest Emerging Technology Symposium (SETS), UT El Paso, April 2018.
  4. Invited Presentation “Digital Manufacturing” Military Institute of Science and Technology, Dhaka, Bangladesh, Dec 2017.
  5. Invited Presentation “Bio-Additive Manufacturing” FM-AM Rotary Club, March 2016.
  6. Invited Presentation “Additive Manufacturing: The Future” FM-PM Rotary Club, Feb 2016.
  7. Invited Poster Presentation “Finding Pathways from NSF-Funded Basic Research to DOE-Funded Applied Research on Additive Manufacturing” NSF/DOE, 2015
  8. Invited Presentation “Designing Spatial Comfort for Additively Manufactured Shoe” at ISERC 2015, Nashville, TN
  9. Seminar Speaker: “Resource Based Process Planning for Additive Manufacturing”, Nov, 2015, Department of Mechanical Engineering Seminar, NDSU.
  10. Seminar Speaker: “Additive Manufacturing”, March, 2014, Department of Industrial and Manufacturing Engineering Seminar Series, NDSU.
  11. Keynote Speaker: “Additive Manufacturing: Our Potentials”, Oct, 2014, Library 3D Printing Open House, NDSU.
  12. Interviewed by “Prairie Public Broadcasting” on bio-manufacturing research in Nov, 2014.
  13. Seminar Speaker: “Modeling and Development of Multi-Functional Tissue Scaffolds with Additive Manufacturing”, Sep, 2013, Department of Civil and Environmental Engineering Seminar Series, NDSU.